BMW K 1300 R, Manual

Page: 69 / 169

load status must be set and the
desired riding mode selected.
The selected riding mode is
displayed in panel
1 of the
multifunction display and the load
status is displayed in panel
2 .
Three load statuses can be
set, with any of the three riding
modes available for each one.
The odometer readings are not
shown while the ESA readout is
active.
Calling up settings
Switch on the ignition.
Press button 1 .
The current setting is
displayed.
The reading remains visible for
a few seconds before disap-
pearing automatically.
Setting the riding mode
Start the engine.
The riding mode can be set
while the motorcycle is in
motion.
Press button 1 .
The current setting is
displayed.
Press button
1 once at each
step.
The display field starts at the
current status and cycles through
the following sequence:
COMF
: comfort mode
NORM
: normal mode
SPORT
: sport mode
The setting shown on the dis-
play is automatically accepted
as the riding mode if you al-
low a certain length of time to
pass without making further
4
65
z Operation