BMW i8 COUPE, Owner'S Manual

Page: 226 / 264

Removing covers
1. Turn the twist locks by 90°, arrows 1, and re‐
move cargo cover, arrow 2.
2. Depending on the vehicle equipment, turn
the screws counterclockwise to undo them,
arrows 1, and remove the cover, arrow 2.
3. Remove insulation.
4. Turn screws counterclockwise to undo them
and remove engine compartment cover, ar‐
row.
To prevent the screws falling into the engine
compartment, do not place screws in the area
where the engine compartment is accessed.
Attaching the covers
1. Insert, arrows 1, press down, arrows 2, and
push in, arrow 3, engine compartment cover.
Turn screws clockwise to tighten.
2. Insert the insulation.
3. Depending on the vehicle equipment, guide
the thread through the opening provided.
Turn screws clockwise to tighten.
4. Insert the cargo cover and secure it with the
twist locks.
Adding engine oil
General information
Only add engine oil when the message is dis‐
played in the instrument cluster. The quantity to
be added is indicated in the message displayed
in the instrument cluster.
Only add suitable types of engine oil, refer to
page
227 .
Safely park the vehicle and switch off standby
state before adding engine oil.
Take care not to add too much engine oil.
Safety information
WARNING
Operating materials, for instance oils, greases,
coolants, fuels, can contain harmful ingredients.
There is a risk of injuries or danger to life. Fol‐
low the instructions on the containers. Avoid
the contact of articles of clothing, skin or eyes
Seite 226
MOBILITY
Engine oil
226
Online Edition for Part no. 01402989296 - II/18