BMW i8 COUPE, Owner'S Manual

Page: 222 / 264

Jacking up the vehicle
WARNING
Hands and fingers can be jammed when using
the vehicle jack. There is a risk of injury. Com‐
ply with the described hand position and do not
change this position while using the vehicle
jack.
1. Hold the vehicle jack with one hand, arrow 1,
and grasp the vehicle jack crank with your
other hand, arrow 2.
2. Insert the vehicle jack into the rectangular re‐
cess of the jacking point closest to the wheel
to be changed.
3. Extend the vehicle jack by turning the vehicle
jack crank or lever clockwise.
4. Take your hand away from the vehicle jack as
soon as the vehicle jack is under load and
continue turning the vehicle jack crank or
lever with one hand.
5. Make sure that the vehicle jack foot stands
vertically and at a right angle beneath the
jacking point.
6. Make sure that the vehicle jack foot stands
vertically and perpendicularly beneath the
jacking point after extending the vehicle jack.
7. Crank up the vehicle jack until the entire sur‐
face of the jack is in contact with the ground
and the wheel in question is raised a maxi‐
mum of 1.2 inches/3 cm off the ground.
Seite 222
MOBILITY
Wheels and tires
222
Online Edition for Part no. 01402989296 - II/18