BMW i4 GRAN COUPE 2022, Owner'S Manual

Page: 179 / 368

Assisted View, refer to page 151 .
Warning function
If you leave the lane
If you leave the lane and if a lane boundary
has been detected, the steering wheel vibrates
in accordance with the steering wheel vibration
setting.
When the turn signal is switched on in the cor-
responding direction before changing the lane,
a warning is not issued.
Steering intervention
Depending on the equipment and the national-
market version: if a lane marking is crossed in
the speed range up to 130 mph/210 km/h, the
system intervenes with a brief active steering
intervention in addition to vibrating. The sys-
tem thus helps keep the vehicle in the lane.
The steering intervention can be noticed on
the steering wheel and can be manually over-
ridden at any time. During an active steering
intervention, the display in the instrument clus-
ter will blink.
For instance, the steering intervention will be
suppressed in the following situations:
▷ With accelerating or braking hard.
▷ When blinking.
▷ With hazard warning system switched on.
▷ In driving situation with high driving dynam-
ics.
▷ The Dynamic Stability Control adjusts.
▷ Immediately following a steering interven-
tion by the vehicle systems.
▷ When actively merging back to your own
lane after passing.
Warning signal
Depending on the national-market version: in
the event of multiple active steering interven-
tions by the system within 3 minutes without
the driver's intervention at the steering wheel
during the steering intervention itself, an
acoustic warning will sound. A short warning
signal will sound at the second steering inter-
vention. Beginning with the third steering inter-
vention, a continuous warning will sound.
In addition, a Check Control message is dis-
played.
The warning signal and Check Control mes-
sage advise to pay closer attention to the lane.
End of warning
For instance, the warning or an active steering
intervention will be canceled in the following
situations:
▷ Automatically after a few seconds.
▷ When returning to your own lane.
▷ With accelerating or braking hard.
▷ With hazard warning system switched on.
▷ When blinking.
▷ Dynamic Stability Control controls the vehi-
cle or is deactivated.
▷ Immediately following a steering interven-
tion by the vehicle systems.
▷ With manual steering intervention.
▷ When another driver assistance system is
activated, if applicable.
▷ Lane boundaries are not detected.
▷ When the system limits are reached.
System limits
General information
Follow the system limits in the "Collision warn-
ing systems" chapter.
Functional limitations
The system may be limited in the following sit-
uations:
Seite 179
Safety CONTROLS
179
Online Edition for Part no. 01405A546C7 - II/22