BMW i4 GRAN COUPE 2022, Owner'S Manual

Page: 307 / 368

4. Insert the connector into the power socket
in the vehicle interior.
5. With standby or drive readiness turned on,
turn on the compressor and let it run for a
maximum of 10 minutes.
If the tire pressures does not reach at least
2 bar/29 psi, contact a dealer's service cen-
ter or another qualified service center or a
repair shop.
When a tire pressure of at least 2 bar/29 psi
is reached, see Minimum tire pressure is
reached.
6. Unscrew the connection hose of the com-
pressor from the tire valve.
7. Pull the connector out of the power socket
in the vehicle interior.
8. Stow the tire repair set in the vehicle.
Minimum tire inflation pressure is
reached
1. Unscrew the connection hose of the com-
pressor from the tire valve.
2. Pull the connector out of the power socket
in the vehicle interior.
3. Stow the tire repair set in the vehicle.
4. Immediately drive approx. 5 miles/10 km to
ensure that the sealing compound is evenly
distributed in the tire.
Do not exceed a speed of
50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the compres-
sor directly onto the tire valve stem.
3. Insert the connector into the power socket
in the vehicle interior.
4. Correct the tire pressure to at least
2 bar/29 psi:
▷ Increase tire pressure: with standby or
drive readiness turned on, turn on the
compressor and let it run for a maxi-
mum of 10 minutes.
▷ Reduce tire inflation pressure: press the
button on the compressor.
5. Unscrew the connection hose of the com-
pressor from the tire valve.
6. Pull the connector out of the power socket
in the vehicle interior.
7. Stow the tire repair set in the vehicle.
Continuing the trip
Do not exceed the permissible maximum
speed of 50 mph/80 km/h.
Seite 307
Wheels and tires MOBILITY
307
Online Edition for Part no. 01405A546C7 - II/22