2
41
Ma
in
te
n
a
n
c
e
a
n
d
ca
re
1
2
4
3
High-beam/low-beam
headlight
Switch off the ignition before
changing a bulb.
Avoid touching the glass of new
bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when inserting them.
• Place the motorcycle on its
main stand [Dakar: side stand]
– Make sure the ground is
level and firm.
• Pull off multi-pin plug
2
• Pull rubber sleeve
1
to the
rear to remove
• Turn retainer
4
counter-
clockwise to disengage
• Remove bulb
3
• Installation is the reverse of
the removal procedure
– Low/high beam headlight
bulb:
H4 12 V 55/60 W
The retainer is easy to install if
you hold it in the correct posi-
tion.
Insert:
at approx. 11 o'clock
position
Lock:
by turning to
12 o'clock position
Changing bulbs
20r13bku4.book Seite 41 Montag, 29. September 2003 12:33 12
