BMW E46/2 Coupe Manual Download Page 52

Page: 52 / 55

E46 Models

Transmissions

There are two transmission variants for the 325xi and 330xi.

The  manual  transmission  for  both  versions  is
the  S5D-280Z  direct  gear  transmission.  The
extension  housing  is  modified  to  accept  the
transfer case.

The transmission has a lifetime fill of MTF-LT1
synthetic transmission fluid.

The automatic transmission for both the 330xi
and 325xi is the A5S-390 R (General Motors)
transmission with GS 20 AGS control and
Steptronic shifter.

The transmission has a lifetime fill of Texaco
8072B.

Transmission Cross-member

Along with the lower transfer case section, the
cast aluminum transmission cross-member is a
low profile design to optomize ground clear-
ance.

Both manual and automatic transmissions
utilize the same part.

S5D-280Z

A5S-390R

Summary of Contents for E46/2 Coupe
























































Search results

Summary of Contents for E46/2 Coupe

Reviews:

Related manuals for E46/2 Coupe

Brands by name

Popular brands

BMW E46/2 Coupe, Manual

Search results

Summary of Contents for E46/2 Coupe

Reviews:

Related manuals for E46/2 Coupe

Brands by name

Popular brands