BMW E46/2 Coupe Manual Download Page 14 | Manualshive

Page: 14 / 55

background image

14

E46 Models

Interior Features

The interior of the E46 has been completely redesigned with an emphasis on more space,
luxury and convenience without compromising the 3 series sporty characteristics.

The new instrument panel/dash is similar in design to the E39 with a slightly less pro-
nounced orientation to the driver. The E38/E39 type face vent grills are used for air distrib-
ution.

The multi-function steering wheel is available on both the 323/325 models and standard
on 328/330 models. There are two different steering wheels available, the four spoke wheel
with MFL and a three spoke sport wheel with MFL. The three spoke sport wheel is option-
al for sedans and standard in coupes. The MFL includes the controls for the audio system
on the left and the cruise control on the right.

The E46 comes equipped with a manually adjustable (tilt/telescopic) steering column. There
is 30 mm of vertical and horizontal adjustment for the steering column.

1. Spring
2. Clamping mechanism
3. Steering lock with

steering column tube

«
...
12
13
14
15
16
...
»

Summary of Contents for E46/2 Coupe
























































Reviews:

No comments

Related manuals for E46/2 Coupe

Brand: kaarta Pages: 29

Brand: Wallbox Pages: 7

Brand: Jeep Pages: 1528

Brand: Rago FABRICATION Pages: 10

Brand: Nav TV Pages: 4

Brand: Yakima Pages: 12

Brand: TATA Motors Pages: 308

LockNLoad LightenUp

Brand: Yakima Pages: 13

Brand: Opel Pages: 242

Brand: Altius Pages: 16

Brand: pewag Pages: 52

Brand: HAKR Pages: 10

Brand: Metra Electronics Pages: 12

Brand: RAM Pages: 288

Brand: N2MB Racing Pages: 13

Brand: 3UVIEW Pages: 15

Brand: Buzz Rack Pages: 8

LiftMaster Professional 975LMC

Brand: Chamberlain Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands