BMW 520D BROCHURE 2009, Owner'S Handbook Manual

Page: 48 / 203

48 n
Sliding/tilt sunroof
*
Despite this protective function,
make sure that the roof is not
obstructed as it closes; if this precau-
tion is not taken, the risk remains that
thin objects, for instance, may not
actuate the closing-force limiter
correctly.
The protective function is switched off
by pressing the switch beyond its
normal pressure point and holding it
there.
<
Sliding/tilt sunroof with glass
panel*
Operation and function are as
described above for the conventional
sliding/tilt sunroof. To open the roof
from the raised position, hold the
switch in the opening direction until the
roof has reached the desired position.
When the roof panel is raised, the
sliding trim is pushed back slightly;
when the roof is slid open, it moves
with the roof panel. It remains in the
opened position and can be slid if the
roof is not completely open.
Interrupted power supply
If the electrical supply has been inter-
rupted, for instance by disconnecting
the car's battery, the roof will initially
only perform a tilting movement. To
restore its full range of functions:
1. Move the sliding/tilt sunroof to the
fully raised position
2. Hold the switch down for approx.
20 seconds.
39
0de
72
5
Emergency operation
In the event of an electrical defect, you
can operate the sliding/tilt sunroof
manually:
1. Take out the interior light, reach into
the aperture and press out the cover
2. Use the Allen key from the car's
toolkit (see page 160) to move the
sunroof in the desired direction.
39
0de
37
6
ba.book Page 48 Tuesday, December 17, 2002 4:26 PM