BMW 520D BROCHURE 2009, Owner'S Handbook Manual

Page: 93 / 203

93 n
Over
vi
ew
Con
trol
s
M
ai
ntenance
Mi
no
rr
ep
ai
rs
Data
Keyw
or
ds
Computer in MID
*
After three incorrect code inputs, or
three attempts to start the engine
without a code input, the alarm will
sound for 30 seconds on cars fitted
with an alarm.
Emergency deactivation:
If you have forgotten the code, proceed
as follows:
1. Disconnect the battery (the alarm will
sound on cars with an alarm system),
wait approx. 2 minutes and then
reconnect it
2. Turn the ignition key to position 1.
The time display will count down for
the next ten minutes
3. After ten minutes, start the engine.
If the code becomes available
again in the meantime, it can be
input during the waiting period after
pressing the CODE key.
<
Remote control
The button in the flashing turn indicator
lever can be used to select the items of
computer information which are to be
displayed.
To do this, press:
>
The button on the indicator lever until
the display shows PROG 1
>
The MID keys in the order in which
you wish the information to be
displayed.
Each time an entry is stored, the
program number appears on the
display.
To terminate the selection procedure:
Press the right of the key.
39
0de
70
0
To have all the available information
displayed, press
>
The button on the indicator lever until
the display shows PROG 1
>
The SET key.
To obtain individual items of informa-
tion, press the button in briefly as often
as necessary.
ba.book Page 93 Tuesday, December 17, 2002 4:26 PM