BMW 2013 K 1600GTL Exclusive, Rider'S Manual

Page: 108 / 174

General instructions
The 'Maintenance' chapter de-
scribes work involving the check-
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional main-
tenance and repair work is pro-
vided in the Repair Manual for
your vehicle on DVD, which you
can obtain from your authorized
BMW Motorrad retailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult an authorized
workshop, preferably your au-
thorized BMW Motorrad retailer.
Onboard tool kit
Onboard toolkit
1 Screwdriver handle
2 Reversible screwdriver in-
sert
with Phillips PH1 and Torx
T25
3 Torx wrench, T25/T30
T25 on short end, T30 on
long end
Replace bulb for
high-beam headlight
(
122).
Adjusting shift lever
(
70).
Remove license-plate
carrier.
Engine oil
Checking engine oil level
The engine can seize if the
oil level is low, and this can
lead to accidents.
Always make sure that the oil
level is correct.
The oil level varies with
the temperature of the
oil. The higher the temperature,
the higher the level of oil in the
sump. Checking the oil level with
the engine cold or after a short
8
106
z Maintenance