BMW 2009 M5 Owner'S Manual Download Page 77

Page: 77 / 266

Select the speed value and press the con-
troller.

Turn the controller to set the limit.

Press the controller to apply the setting.
The limit is activated.

Applying your current speed as limit

Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.

Activating/deactivating the limit

Select "On" and press the controller.

The limit is activated.

Stopwatch

iDrive, for operating principle refer to page

Open the start menu.

Open "Navigation".
Without navigation system

Open "Car Data".

Select "Car Data" and press the controller.

Select "Stopwatch" and press the control-
ler.

Starting, stopping or resetting

Select "Start" and press the controller.
The stopwatch starts at the displayed time.

Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.

Select "Stop" and press the controller.
This stops the timer.

Taking an intermediate time reading

Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.

All of the other functions remain available
even while the stopwatch is running. The

stopwatch continues operation in the back-
ground.

Settings on Control Display

iDrive, for operating principle refer to page

Press the

button once or twice until

the start menu appears.

Press the controller to open the menu.

Turn the controller until "Settings" is
selected and press the controller.

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

Summary of Contents for 2009 M5











































































































































































































































































Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands

BMW 2009 M5, Owner'S Manual

Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands