BMW 2009 M5 Owner'S Manual Download Page 165

Page: 165 / 266

163

Select "Store" and press the controller.

"Presets" is displayed.

Turn the controller to select a memory loca-
tion and press the controller.

The channel is stored. The channels of the last
selection criterion are displayed once again
after a short time.

Changing channel with buttons next to
CD player

Press the

button for the corresponding

direction.
The system changes to the next enabled chan-
nel.

Notes

If no signal can be received for more than 4 sec-
onds, a message is displayed on the Control
Display.

Reception may not be possible for certain
reasons, e.g. environmental influences or

topographical conditions. The satellite radio
has no influence on this.
The signal may not be available in tunnels or
underground garages, next to tall buildings,
near trees, mountains or other sources of radio
interference.

Reception is usually possible again as soon as
the signal is available again.

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

Summary of Contents for 2009 M5











































































































































































































































































Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands

BMW 2009 M5, Owner'S Manual

Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands