BMW 2007 M5 Owner'S Manual Download Page 36

Page: 36 / 256

Opening and

closing

Opening from outside

Press the button on the luggage compartment
lid or the

button on the remote control for

approx. 1 second: the luggage compartment lid
opens.

Closing

Make sure that the closing path of the
luggage compartment lid is clear, other-

wise injuries may result.

The handle recesses on the interior trim of the
luggage compartment lid make it easier to pull
down.

Emergency release

Pull the lever in the cargo bay. The luggage
compartment lid is unlocked.

Manual release

If an electrical malfunction should occur, you
can unlock the luggage compartment lid manu-
ally.

Grasp the rear seat

at the front edge and

remove from the mounts

. Take out the

rear seat.

Pull the ring. The luggage compartment lid
is unlocked and opens.

Only grasp the emergency release by
the ring, otherwise injuries can

occur.

Reinstalling rear seat:

Position the rear seat in the vehicle. Guide
the two outer belt buckles

through the

seat bench and slide the seat bench com-
pletely under the backrest. The center belt

ba8_m5us.book Seite 34 Montag, 5. Februar 2007 12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG

Summary of Contents for 2007 M5

































































































































































































































































Search results

Summary of Contents for 2007 M5

Reviews:

Related manuals for 2007 M5

Brands by name

Popular brands

BMW 2007 M5, Owner'S Manual

Search results

Summary of Contents for 2007 M5

Reviews:

Related manuals for 2007 M5

Brands by name

Popular brands