BMW 2007 M5 Owner'S Manual Download Page 55

Page: 55 / 256

Child seat security

All rear safety belts and the safety belt for the
front passenger can be locked against pulling
out to secure child restraint systems.

Locking safety belt

Secure the child restraint system with the
belt.

Pull out the belt webbing completely.

Allow the belt webbing to be pulled in and
pull taut against the child restraint system.
The safety belt is locked.

Unlocking safety belt

Open the belt buckle.

Remove the child restraint system.

Allow the belt webbing to be pulled in com-
pletely.

Child restraint system with tether strap

Only use the tether-strap mounting
points to secure child restraint systems,

otherwise the mounting points could be dam-
aged.

There are three additional mounting points for
child restraint systems with a tether strap, refer

to arrows. Fold the corresponding mounting
point upward before using.

Placement of tether strap

Outer seats:

Pull the head restraint upward.

Guide the tether strap through the bracket
of the head restraint.

Slide the head restraint into the bottom
position.

Hook in the tether strap on the mounting
point.

Center seat:

Fold the center armrest somewhat toward
the front.

Guide the tether strap through the opening.

Fold back the center armrest.

Hook in the tether strap on the mounting
point.

LATCH child restraint fixing system

LATCH: Lower Anchor and Tethers for CHil-
dren.

To attach and use a LATCH child restraint
system, follow the operating and safety

instructions of the system manufacturer.

ba8_m5us.book Seite 53 Montag, 5. Februar 2007 12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG

Summary of Contents for 2007 M5

































































































































































































































































Search results

Summary of Contents for 2007 M5

Reviews:

Related manuals for 2007 M5

Brands by name

Popular brands

BMW 2007 M5, Owner'S Manual

Search results

Summary of Contents for 2007 M5

Reviews:

Related manuals for 2007 M5

Brands by name

Popular brands