223
Manual transmission
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
2.
Switch on the ignition, refer to page
.
3.
Shift into 3rd gear.
4.
Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
Sequential Manual Transmission with
Drivelogic
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
2.
Switch on the ignition, refer to page
.
3.
Tow-start in selector lever position N.
4.
Move the selector lever into the drive posi-
tion and pull within 2 seconds.
The correct gear will be selected and
engaged automatically.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
ba8_m5us.book Seite 223 Montag, 5. Februar 2007 12:03 12
Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG