BMW 2006 M5 Owner'S Manual Download Page 88

Page: 88 / 231

Instrument lighting

The lighting intensity can be adjusted with the
knurled wheel with the parking lamps/low
beams switched on.

Interior lamps

The interior lamps, footwell lamps, door entry
lighting

and courtesy lamps

are controlled

automatically.
With the courtesy lamps, LED lights are located
in the door handles to illuminate the exterior
area before the doors.

To protect the battery, all lamps in the
vehicle are switched off approx. 15 min-

utes after radio readiness is switched off, refer
to Start/Stop button on page

Switching interior lamps on and off

manually

Press the button.
If you want the interior lamps to remain off con-
tinuously, maintain pressure on the button for
approx. 3 seconds.

Reading lamps

Reading lamps are located in the front and rear
adjacent to the interior lamps. Press the button
briefly to switch the lamps on and off.

Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG

Summary of Contents for 2006 M5








































































































































































































































Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands

BMW 2006 M5, Owner'S Manual

Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands