manualshive.com logo in svg

BMW 2004 R 1200 ST, Rider'S Manual

Share
Download
BMW 2004 R 1200 ST Rider'S Manual Download Page 71

4

69

Ri

ding

Placing motorcycle on 
centre stand

OE/OA

 

If the ground is soft or un-
even, there is no guaran-

tee that the motorcycle will 
rest firmly on the stand. 
Always check that the ground 
under the stand is level and 
firm.

c

• Switch off the engine.
• Dismount and keep your left 

hand on the left handlebar 
grip.

• With your right hand, grip the 

left rear side panel.

• Place your right foot on the 

pin of the centre stand, and 
press the stand down until 
its curved feet touch the 
ground.

• Place the full weight of your 

body on the centre stand, 
while pulling the motorcycle 
to the rear (arrow).

• Check that the motorcycle is 

standing firmly.

Excessive movements 
could cause the centre 

stand to retract, and the mo-
torcycle would topple in con-
sequence.
Do not lean or sit on the mo-
torcycle with the centre stand 
extended.

c

k28_g.book  Seite 69  Freitag, 26. November 2004  12:03 12

Summary of Contents for 2004 R 1200 ST





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands