BMW 2004 R 1200 ST, Rider'S Manual

Page: 112 / 164

Ma
in
te
n
a
n
c
e
6
110
Replacing rear turn
indicator bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.
c
• Switch off the ignition.
• Remove screw 1 .
• Remove turn indicator
glass 2 .
• Press the bulb into its socket
and turn it counter-clock-
wise to remove.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Jump starting
The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting the
engine. Excessively high cur-
rent can lead to a cable fire or
damage to the vehicle elec-
tronics.
Do not use the on-board sock-
et to jump-start the engine.
c
Do not use proprietary
start-assist sprays or
other products to start the
engine.
c
k28_g.book Seite 110 Freitag, 26. November 2004 12:03 12