BMW 2004 R 1200 ST, Rider'S Manual

Page: 105 / 164

6
103
Ma
in
te
n
a
n
c
e
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked, preferably
an authorised BMW motor-
cycle dealer.
c
• Roll the rear wheel into posi-
tion at the rear wheel hub.
• Lift the rear wheel onto the
rear wheel hub.
• Install rear-wheel studs 3
and tighten in diagonally
opposite sequence to
60 Nm.
• Turn the end silencer to its
initial position.
• Install screw 2 for the
bracket of the end silencer in
the rear footrest, but do not
tighten it at this point.
A lack of clearance be-
tween the rear wheel and
the end silencer can result in
damage to the rear wheel.
The clearance between rear
wheel and end silencer is cor-
rect when the handle of the
screwdriver from the toolkit
can be slipped between the
two.
c
k28_g.book Seite 103 Freitag, 26. November 2004 12:03 12