BMW 2004 R 1200 ST, Rider'S Manual

Page: 109 / 164

6
107
Ma
in
te
n
a
n
c
e
• Disengage spring clip 4 at
top and bottom and secure it
(preferably by hooking it into
the headlight housing).
• Remove bulb 5 .
Installation is the reverse of the
removal procedure.
• When installing, make sure
that lug 6 is pointing up and
that the bulb is securely
seated.
• Check that the bulb is cor-
rected seated (by looking in
through the headlight lens).
Changing side light bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.
c
The parking-light bulb is in the
housing of the bottom head-
light.
• Switch off the ignition.
• Pull bulb holder 1 out of the
headlight housing.
K28_06_wartung_g.fm Seite 107 Donnerstag, 9. Dezember 2004 3:05 15