BMW 2 SERIES COUPE Owner'S Manual Download Page 344

Page: 344 / 360

Cargo straps, see Lashing eyes in the cargo

area

262

Caring Car, BMW Intelligent Personal Assis‐

tant

Car key, see Vehicle key

Carpet, care

335

CarPlay, connection to the vehicle

Car seats, see Transporting children safely

Catalytic converter, see Hot exhaust gas sys‐

tem

267

CBS Condition Based Service

319

Cell phone, see Owner's Manual for Navigation,

Entertainment and Communication

Center armrest, front

259

Center console

Central Information Display (CID), see Control

Display

Central locking switch, see Central locking sys‐

tem

Central locking system

Central screen, see Control Display

Changes, technical, see For Your Own Safety

Change, wheels and tires

Charging smartphone, see Wireless charging

tray

254

Charging tray for smartphones, see Wireless

charging tray

254

Chassis/suspension, electronic, see Adaptive M

chassis/suspension

230

Chassis number, see Vehicle identification num‐

ber

Check Control

142

Checking the engine oil level electronically

314

Children, seating position

115

Children, transporting safely

115

Child restraint systems, mounting

116

Child restraint systems, see Transporting chil‐

dren safely

115

Child seat, mounting

116

Child seat mountings LATCH

117

Child seats, see Transporting children

safely

115

Chrome-plated surfaces, care

334

Chrome surfaces, care

334

Cigarette lighter

251

Cigarette lighter, front

251

Cleaning displays, screens

335

Cleaning, Head-up Display

335

Clearance, water

268

Climate control

231

Climate control rules

114

Closing with the Key Card

Closing with the smartphone, see BMW Digital

Key

Clothes hooks

260

Coasting

275

Coasting with engine decoupled, see Coast‐

ing

275

Coasting with idling engine

275

Combination switch, see Turn signals

128

Combination switch, see Washer/wiper sys‐

tem

129

Comfort Access

COMFORT, see Driving Dynamics Control

123

Communication, see Owner's Manual for Naviga‐

tion, Entertainment and Communication

Comparison of entries, see Entry comparison

Compartments in the doors

258

Compass

142

Compatible devices, see Suitable devices

Compressor

291

Concierge Service, see Owner's Handbook for

Navigation, Entertainment, Communication

Condensation water under the parked vehi‐

cle

269

Condensation, windshield

234

239

Condition Based Service CBS

319

Confirmation signal from the vehicle

Connect device

ConnectedDrive, see Owner's Manual for Navi‐

gation, Entertainment and Communication

Connecting electrical devices, see Sockets

251

Connecting, mobile devices

Connections, Screen Mirroring

Consumption display, ECO PRO

274

Consumption display, widget in the instrument

cluster

140

141

Seite 344

REFERENCE

Everything from A to Z

344

Online Edition for Part no. 01405A38726 - VI/21

Summary of Contents for 2 SERIES COUPE









































































































































































































































































































































































Search results

Summary of Contents for 2 SERIES COUPE

Reviews:

Related manuals for 2 SERIES COUPE

Brands by name

Popular brands

BMW 2 SERIES COUPE, Owner'S Manual

Search results

Summary of Contents for 2 SERIES COUPE

Reviews:

Related manuals for 2 SERIES COUPE

Brands by name

Popular brands