BMW 2 SERIES COUPE, Owner'S Manual

Page: 113 / 360

The following settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Safety information
Warning
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the
memory function when the vehicle is stationary.
Warning
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
ment.
Overview
The memory buttons are located on the driver's
door.
Storing
1. Set the desired position.
2. Press the button. The writing on the
button lights up.
3. Press desired button 1 or 2 while the LED is
lit. A signal sounds.
Calling up settings
Press the desired button 1 or 2.
The stored position is called up.
The procedure stops when a switch for setting
the seat is pressed or one of the memory but‐
tons is pressed again.
The adjustment of the seat position on the driv‐
er's side is interrupted after a short time while
driving.
Seat heating
Overview
Seat heating
Turning on
Press the button once for each temper‐
ature level.
The maximum temperature is reached when
three LEDs are lit.
If the trip is continued within approx. 15 minutes
after a stop, seat heating is switched on auto‐
matically with the temperature selected last.
When ECO PRO is activated, the heating output
is reduced.
Additional information:
ECO PRO, refer to page
272 .
Seite 113
Seats, mirrors and steering wheel
CONTROLS
113
Online Edition for Part no. 01405A38726 - VI/21