BMW 2 SERIES COUPE Owner'S Manual Download Page 94

Page: 94 / 360

▷

The volume of the audio system is limited.

▷

The integrated Universal Remote Control is
deactivated.

▷

DSC cannot be switched off.

▷

Depending on the vehicle, the trunk lid can
be locked and disconnected from the central
locking system.

Functional requirements

▷

At least one driver profile has been created.

▷

A driver profile or the guest profile is active.

▷

At least one driver profile has an assigned
ConnectedDrive account.

Accessing the menu for the valet

parking mode

Via the switch-off screen

After switching off drive-ready state the switch-
off screen will be displayed. Select the entry for
the valet parking mode on the switch-off screen.

Via the display bar at the upper edge
of the Control Display

Tip the Controller up.

"Valet parking mode"

Via the vehicle settings

"CAR"

"Settings"

"General settings"

"Valet parking mode"

Activating the valet parking

mode

General information

Before activating the valet parking mode, a PIN
must be set up to be able to deactivate the valet
parking mode at a future time.

The procedure for entering the PIN varies de‐
pending on the active driver profile.

Driver profile with PIN

A PIN has been stored for the active driver pro‐
file.
It is not necessary to enter another PIN.

"Lock tailgate as well"
The trunk lid will be locked and disconnected
from the central locking system.

"Activate now"

Driver profile without PIN

A PIN must be assigned to the driver profile.

"PIN"

Enter PIN.

"Lock tailgate as well"

"Activate linkage"

"Activate now"

Guest profile

The guest profile is the active driver profile.
A PIN must be entered.

"PIN"

Enter PIN.

"Lock tailgate as well"
The trunk lid will be locked and disconnected
from the central locking system.

"Activate now"
This PIN can be used once to deactivate the
valet parking mode for the active guest pro‐
file.

Deactivating valet parking mode

General information

The lock screen of the valet parking mode is dis‐
played on the Control Display.

Seite 94

CONTROLS

Opening and closing

Online Edition for Part no. 01405A38726 - VI/21

Summary of Contents for 2 SERIES COUPE









































































































































































































































































































































































Search results

Summary of Contents for 2 SERIES COUPE

Reviews:

Related manuals for 2 SERIES COUPE

Brands by name

Popular brands

BMW 2 SERIES COUPE, Owner'S Manual

Search results

Summary of Contents for 2 SERIES COUPE

Reviews:

Related manuals for 2 SERIES COUPE

Brands by name

Popular brands