BMW 2 COUPE 2023 Series Owner'S Manual Download Page 319

Page: 319 / 340

FCC ID QZ9-WCACS
This device complies with part 15 of the FCC

Rules and Industry Canada license-exempt

RSS standard(s). Operation is subject to the

following two conditions:
(1) This device may not cause harmful interfer-

ence, and
(2) this device must accept any interference

received, including interference that may cause

undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly ap-

proved by the party responsible for compliance

could void the user's authority to operate the

equipment.
RF Exposure Requirements
To comply with FCC RF exposure compliance

requirements, the device must be installed to

provide a separation distance of at least 20 cm

from all persons.

Seite 319

Appendix

REFERENCE

319

Online Edition for Part no. 01405A5E788 - VI/22

Summary of Contents for 2 COUPE 2023 Series





















































































































































































































































































































































Search results

Summary of Contents for 2 COUPE 2023 Series

Reviews:

Related manuals for 2 COUPE 2023 Series

Brands by name

Popular brands

BMW 2 COUPE 2023 Series, Owner'S Manual

Search results

Summary of Contents for 2 COUPE 2023 Series

Reviews:

Related manuals for 2 COUPE 2023 Series

Brands by name

Popular brands