BMW 2 COUPE 2023 Series, Owner'S Manual

Page: 192 / 340

speed to the traffic conditions and brake as
needed.
Changing over the Cruise Control mode
Switching Cruise Control without Distance
Control off and on:
▷ Press and hold this button.
▷ Press and hold this button.
Switching on distance control:
▷ Press the button.
▷ Press the button.
After changing, a Check Control message is
displayed.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the sys-
tem.
▷ Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷ Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷ No marking: system is switched off.
Indicator/warning lights
Depending on vehicle equipment:
Icon Description
Vehicle icon white:
No distance control display, as the
accelerator pedal is being pressed.
Green icon:
A vehicle has been detected ahead of
you.
The vehicle icon goes out if no vehicle
in front is detected.
Vehicle icon flashes green:
Vehicle in front drove off.
Gray icon:
System interrupted.
Icon flashes gray:
The conditions are not adequate for
the system to work.
The system was deactivated but ap-
plies the brakes until you actively
resume control by pressing on the
brake pedal or accelerator pedal.
Vehicle icon flashes red and a signal
sounds:
Brake and make an evasive maneu-
ver, if necessary.
Displays in the Head-up display
Set speed
Some system information can also be dis-
played in the Head-up display.
The icon is displayed when the set
speed is reached.
Distance information
The icon is displayed when the dis-
tance from the vehicle traveling ahead
is too short.
Seite 192
CONTROLS Driver assistance systems
192
Online Edition for Part no. 01405A5E788 - VI/22