BMW Motorrad K 1600GT 2018, Rider'S Manual

Page: 95 / 236

while the remote control was out
of range of the anti-theft alarm.
The procedure for synchron-
ising the remote controls is as
follows:
Switch on the ignition.
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons
1 and 2 .
LED 3 lights up.
Press button 1 or button 2 .
LED 3 goes out.
Replacing battery of
remote control
with central locking system
OE
with anti-theft alarm (DWA) OE
without Keyless Ride OE
If you press a button on the re-
mote control and the LED does
not show or lights up only briefly:
Replace the battery of remote
control.
Open lid of battery compart-
ment
1 .
Dispose of the old battery in
accordance with all applicable
laws and regulations; do not
attempt to dispose of batteries
as domestic waste.
ATTENTION
Unsuitable or incorrectly in-
serted batteries
Component damage
Use a battery compliant with
the manufacturer's specifica-
tions.
When inserting the battery,
always make sure polarity is
correct.
Insert the new battery with the
positive terminal up.
Battery type and battery
rated voltage
For remote control
CR 2032
3 V
The LED on the remote control
lights up; the remote control
has to be synchronised.
4
93
z Operation