BMW Motorrad K 1600GT 2018, Rider'S Manual

Page: 146 / 236

Remove screw 1 and remove
the wheel-speed sensor from
its bore.
Lift the front of the motorcycle
until the front wheel is clear of
the ground, preferably using
a BMW Motorrad front-wheel
stand.
Fitting the front-wheel stand
(
132).
ATTENTION
Incorrect gap between
sensor ring and wheel speed
sensor due to misaligned
threaded bush in front
suspension
Damage to wheel speed sensor.
ABS malfunction
Left clamp locates the
threaded bush; do not loosen
or remove this clamp.
Remove right-hand axle clamp-
ing screw
2 .
Remove quick-release axle 3 ,
while supporting the wheel.
Roll the front wheel forward to
remove.
Installing front wheel
WARNING
Use of a non-standard wheel
Malfunctions in operation of ABS
and DTC
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
8
144
z Maintenance