BMW Motorrad K 1600GT 2018, Rider'S Manual

Page: 154 / 236

The LED additional headlights
can be replaced as a complete
unit only.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replace LED flashing turn
indicators
The LED flashing turn indicators
can be replaced only as a com-
plete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replacing LED rear light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board elec-
tronics
Make sure that the battery of
the donor vehicle has a voltage
rating of 12 V.
When jump-starting the engine,
do not disconnect the battery
from the on-board electrical
system.
Removing front seat (
99).
8
152
z Maintenance