BMPRO TrailSafe, Owner'S Manual

Page: 9 / 24

INSTALLATION INSTRUCTIONS
MOUNTING LOCATION
Secure the TrailSafe or Tr to the right hand side draw bar of the trailer (the
driver’s side) approximately 300mm from the tow ball hitch. Mount horizontally on
top or side of the draw bar.
MOUNTING METHOD
Mount on the arm of the trailer using the supplied mounting screw or similar. Only
one mounting point is required so that the unit can swivel in an emergency. Ensure
that it is secured tightly so that it does not vibrate loose.
MOUNTING ORIENTATION
The wires should be pointing towards the rear (away from the tow vehicle) so that
the pull pin is facing towards the tow vehicle. The pull pin will then be pulled out
freely should the vehicle and trailer separate. The other end of the pull pin cord is
attached to the towing vehicle by a D-shackle or similar.
Figure 1:
TrailSafe mounting diagram
9