Designed by BMPRO, one of Australia’s leading power solution experts, the
BMPRO product range is proudly designed and manufactured in Melbourne,
Australia, and represent a high-quality product that will provide years of
service.
DISCLAIMER
BMPRO accepts no liability for any loss or damage which may
occur from the improper or unsafe use of its products. Warranty is only valid
if the unit has not been modified or misused by the customer.
Copyright © 2019
MANUAL PART 032771
REV 3.0
Correct installation is the most critical factor in ensuring the safe use of the JControl. If
every consideration of these instructions has been satisfied, the JControl will be safe to
operate.
Keep the JControl away from water or other liquids.
Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use
alcohol, thinners, benzene or any other chemical cleaner. Do not allow any liquids to
enter the housing.
The JControl is a high precision electronic product. It contains no user-serviceable parts
inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair
by an unauthorised person will void the warranty.
SAFETY PRECAUTIONS
Please read the Safety Precautions before installing or using the JControl.
Be sure to observe all precautions without fail. Failure to observe these instructions
properly may result in personal damage, or personal injury which depending on the
circumstances may be serious and cause loss of life.
