7
5
6
7
8
As the caravan loads are no longer powered, Sleep Mode is a convenient way
to save remaining power of your battery if you are on the road and have limited
ability to charge the battery.
When charging, Sleep Mode ensures that all available charging current is
dedicated to charging your battery.
In Set-Up mode, the Battery button acts as the EDIT function.
SETTINGS BUTTON
To enter Set-Up mode on the JControl and configure user settings.
In Set-Up mode, the Settings button acts as the BACK function.
BACKLIGHT BUTTON
To turn the backlight/nightlight of the JControl screen on and off.
A single press of the backlight button will turn the backlight on.
Press again to turn the backlight off, otherwise the backlight will automatically
turn off after 30 seconds.
To turn the nightlight on, press and hold the backlight button for three seconds
or until the backlight blinks. The nightlight will stay on for 10 hours. To turn
nightlight off, press and hold the backlight button until the nightlight turns off.
In Set-Up mode, the Backlight button acts as the UP-scroll arrow function.
WATER PUMP BUTTON
To turn the water pump connected to the J35 on and off. Whenever the J35 and
JControl are powered on, or whenever you press the Battery button to exit Sleep
Mode, by default, the water pump will be off.
Press the water pump button to toggle the water pump on and off.
In Set-Up mode, the Water Pump button acts as the DOWN-scroll arrow function.
INPUT AMPS
Displays the current drawn by the J35 from its auxiliary and solar inputs to power
loads and charge the caravan battery.
If either of the inputs are unavailable to the J35, the JControl will display
“--.-“. If either of the inputs are available to the J35 but not in use, the JControl
will display “00.0”
