background image

19

WARRANTY TERMS AND CONDITIONS

Registering your BMPRO product is an important step to ensure that you receive all the benefits you 
are entitled to. Please visit 

teambmpro.com

 to complete the online registration form for your new 

product today.

1.  BMPRO goods come with guarantees that cannot be excluded under Australian Consumer 

Law. You are entitled to a replacement or refund for major failure and for compensation for any 
reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced 
if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 
The benefits under this Warranty are in addition to your other rights and remedies under a law in 
relation to the goods to which this Warranty relates (the Australian Consumer Law).

2.  BMPRO warrants products against defects for a period of two years, commencing from the 

original date of purchase. Proof of purchase is required before you can make a claim under this 
warranty.

HOW TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY
3.  The JControl is designed to be installed by a suitably qualified installer. You or your installer 

should carefully inspect the products before installation for any visible manufacturing defects. We 
accept no responsibility in addition to our consumer guarantee obligations where a product has 
been installed incorrectly.

4.  This warranty does not extend to product failures or defects caused by, or associated with, but not 

limited to: failure to install or maintain correctly, unsuitable physical or operating environment, 
accident, acts of God, hazard, misuse, unauthorised repair, modification or alteration, natural 
disaster, corrosive environment, insect or vermin infestation and failure to comply with any 
additional instructions supplied with the product.

5.  BMPRO may seek reimbursement of any costs incurred by BMPRO when a product is found to be in 

proper working order or damaged as a result of any of the warranty exclusions mentioned in point 
4 of this statement.

6.  To enquire or make a claim under this warranty, please follow these steps:

a.  Prior to returning a BMPRO product, please email 

[email protected]

 to obtain a 

Return Material Authorisation (RMA) number

b.  Package and send the product to:  

BMPRO Warranty Department 
19 Henderson Road 
Knoxfield, VIC 3180 

Please mark RMA details on the outside of the packaging

c.  Please ensure the package also includes: a copy of the proof of purchase, a detailed  

description of the fault and your contact details including phone number and return address.

7.  BMPRO will not be liable for any costs, charges or expenses incurred in the process of returning a 

product in order to initiate a warranty claim.

Summary of Contents for JControl





















Reviews: