Display Features
10
The display pad is equipped with 3 buttons including "M", "+"(UP) and" -" (DOWN). The "M" button is the mode/switch button.
Press and hold the "M" button on the handlebar controls to turn on the display. Now, your e-bike is ready to ride. To turn it off, press and hold
Press the UP button for 3 seconds to turn on the light.
The display pad provides you with a variety of displays to meet the demand of your riding. The display contents are:
1.
Operating Current to the Controller:
It shows operating current to the controller and each bar is 2A.
2.
Unit of Measure:
You can toggle between miles or kilometers based on your location and preference.
3.
Speed Indicator:
It shows the real-time speed of your e-bike.
4. Battery Level Indicator:
The battery level indicator on the display will show the current battery energy remaining. The light on the top of the battery will lash to
remind you when the power is too low.
5.
Pedal Assist Level:
1).
AUTO: Press and hold the DOWN button for 1.5 seconds to light up the 6KM icon.
2).
Assist: It shows the pedal assist level and the default range is 0-5 levels.
6.
o display items as follows):
1).
Wheel Size: The current wheel size information will be displayed in the setting screen of SET3.
2).
Error Code Indicator: The icon and code will be displayed at a frequency of 1HZ in the event of a problem.
3).
Cycle Display: It can be automatically switched and shows all the information.
4). Odometer: The total mileage will be displayed.
5).
Riding Time: It displays the time information of a single riding.
6).
Trip Odometer: It displays the mileage information of a single riding.
7).
Maximum Speed: It shows the real-time speed that is the maximum speed.
