Assembly Instructions
7
NOTICE:
Ensure all hardware is tightened properly and all safety checks in the following sections are performed before first use.
Step 5
: Install the pedals. The left and right pedals are marked on both ends. First, install the right pedal by tightening the pedal in a clockwise
direction. The left pedal is tightened by turning the pedal in a counterclockwise direction. Both pedals should be tightened to 35
Newton meters by using a torque wrench.
Step 6
: Adjust the saddle height. Loosen the seat clamp, remove the seat post and ensure the seat clamp is centered over the hole in the seat
tube. Insert the seat post into the slot, adjust the saddle height to a suitable height and tighten the adjustment nut.
Step 7
: Adjust the seat position forwards or backwards. Use an allen wrench to loosen the seat adjustment bolt and make sure to stay within
the marked adjustment range.
Step 8
: Install the optional rear rack. Align the holes in the rear rack with the holes in the frame and tighten them with screws.
Step 9
: Install the taillight. Attach the taillight and the rear rack by the screw.
Step 10
: Check if the battery pack is locked into the frame of the WALKER Breeze Step-Thru. When you want to take off the battery, insert
the key and turn it to release the battery pack. The battery pack can be removed and charged separately.
