Routine Operation
11
General Settings
1. Press the UP and DOWN keys at the same time for 2S to enter the setting interface and then press the M key to switch.
2. Press the UP and DOWN keys to select theparameter.
3. Press the UP and DOWN keys at the same time to exit.
SET1: Single Mileage Setting
You can press DOWN key to reset.
SET2: Maximum Speed Setting
SET4: Choice of Miles (KM/H or
MPH)
Error Code
Definition
Error Code
Definition
9
Abnormal Communication
23
Motor Phase Problem
21
Abnormal Current
24
Motor Hall Defect
22
Throttle Fault
25
Brake Failed or Brake Applied While Turning On
When the error code is displayed, please promptly remove the fault. After the fault occurs, the electric bike will not be able to ride normally.
