BMB KSP-100, Owner'S Manual

Page: 14 / 21

Changing the Settings
14
Setting the MUSIC Parameters
The following parameters allow you to adjust the tone quality of
the signals input to AUDIO INPUT’s KARAOKE, AUX 1, and AUX 2
jacks, and adjust the amount of Reverb effect .
Parameter Value Explanation
KARAOKE Level Mute, -63 .0dB–0 .0dB KARAOKE input level
AUX1 Level Mute, -63 .0dB–0 .0dB AUX 1 input level
AUX2 Level
Mute, -63 .0dB–0 .0dB AUX 2 input level
EQ Type PEQ, GEQ Select EQ type
Noise Suppressor
Parameter Value Explanation
Switch Off, On Noise Suppressor switch
Threshold 0–100
Volume at which noise
suppression begins .
Release 0–100
Time from when noise
suppression begins until the
volume reaches zero .
Compressor
Parameter Value Explanation
Switch Off, On Compressor switch
Attack
0–100
Speed at which compression
starts .
Release 0–100
Time from when the volume
falls below the threshold level
until the compressor effect is
no longer applied .
Threshold 0–100
Volume level at which compres-
sion begins .
Ratio
1 .00:1–16 .0:1, Inf:1 Compression ratio
Post Gain 0–+18dB Output gain
Output Level 0–100 Output level
EQ (EQ Type = GEQ)
Parameter Value Explanation
Switch Off, On EQ switch
BAND1 Gain -12dB–+12dB Gain
:
BAND15 Gain -12dB–+12dB Gain
EQ (EQ Type = PEQ)
Parameter Value Explanation
BAND1 Type Shelving, Peaking Filter type
BAND1 Freq . 20 .0Hz–20 .0kHz Frequency
BAND1 Gain -12dB–+12dB Gain
BAND1 Q
0 .3–16
Bandwidth . Higher values make
the band narrower .
BAND2 Freq . 20 .0Hz–20 .0kHz Frequency
BAND2 Gain
-12dB–+12dB Gain
BAND2 Q 0 .3–16
Bandwidth . Higher values make
the band narrower .
:
BAND15 Q 0 .3–16
Bandwidth . Higher values make
the band narrower .
Setting the OUTPUT Parameters
The following parameters allow you to set the HANAMICHI effect
and adjust the sound that emanates from the speakers .
Parameter Value Explanation
Output Channel
2ch
Select this option when the
FRONT-L and FRONT-R speakers are
connected .
3ch
Select this option when the FRONT-
L, FRONT-R and CENTER speakers are
connected .
4ch
Select this option when the
FRONT-L, FRONT-R, SUR-L and SUR-R
speakers are connected .
5ch
Select this option when the
FRONT-L, FRONT-R, SUR-L, SUR-R and
CENTER speakers are connected .
HANAMICHI
Switch
Off, On HANAMICHI effect switch
HANAMICHI
Width
0–2 Adjusts the soundscape .
HANAMICHI
Depth
0–5 Adjusts the amount of reverberation .
FRONT-L / FRONT-R / SUR-L / SUR-R / CENTER
Parameter Value Explanation
Output Level
Mute,
-63 .0dB–0 .0dB
Output level
MIC Direct Level 0–100 MIC direct level
MIC Echo Level 0–100 MIC echo level
MUSIC Level
0–100 MUSIC level
HANAMICHI
Level
0–100
Specifies the MUSIC level when the
HANAMICHI Switch is set to on .
SUBWOOFER
Parameter Value Explanation
Output Level
Mute, -64 .0dB–
+6 .0dB
Output level
Phase Normal, Inverse Phase of signal
MIC Direct Level 0–100 MIC direct level
MIC Echo Level 0–100 MIC echo level
MUSIC Level 0–100 MUSIC level