7
www.hommix.co.uk
Mounting the Zada / Zada Pro
Mounting the Zada or the Zada Pro is really simple as it is already supplied with the mount and the parts for mounting
it. Please ensure that there is at least 10cm empty below the bottom of the filter system to ensure you have enough
space to pull the filter(s) down when the filter is due to be replaced.
Simply mark the cupboard with the two holes once you’re satisfied with the height of the mount location, then simply
hold the Zada / Zada Pro up and screw into the preferred location.
Hommix 3-Way Tap Connection
Connecting your tap to a Hommix 3-Way Tap is really simple. Once you’ve followed the steps above to mount and connect your
Zada / Zada Pro to the feed water, simply connect the tube to the Hommix 3-Way tap using one of the three methods below
(connections differ for different types of Hommix 3-Way Taps).
Nut Connection
JACO Connection
Push Fit Connection
Min: 10cm
Simply push all the way in
Push the tube through the
plastic JACO connection into
the tap then screw the JACO
connection tightly
Push the tube through the nut into
the connection, tighten the then
screw the connection tightly to the
tap
