6
www.hommix.co.uk
Tap Connection
First of all, a proper location to mount the tap needs to be selected, paying close attention to the placement of the
tap stem under the counter.
Ensure you use the correct type of drill bit for your counter type
Hammer Drill Bit:
Cement, Tile, Granite, Marble & Marmoreal
HSS Drill Bit:
Steel, Wood, Chrome, Metal & Aluminium
1. Drill initial hole using a 5mm drill bit then use a 12mm drill bit to enlarge the hole to the proper diameter
2. Place the tap through the drilled hole and mount it to the sink per the images above
3. Install the Flange, Rubber Gasket, Locking Washer
4. Tighten the tap with the Faucet Nut using a Spanner
5. Insert the Tubing Pin to the white tube provided and connect to the taps stem using the Tubing Ring & Nut
6. Connect the other end of the tubing to the “Clean Water” port on the system and you’re good to go!
