5
www.hommix.co.uk
Feed Water Connection
The purpose of the feed water connection is to feed the system with water to be purified by
tapping the cold-water supply which is usually located under the kitchen counter.
Before you start, please ensure you have turned off the main water supply
and always ensure there is a bucket or bowl and dry cloth for unforeseen
circumstances.
Please see figure below for instructions on how to make the feed water connection.
Please note, depending on manufacturers stock some of the metal ball valves may be with ‘Screw Fitting’ rather than
the ‘Push Fitting’ illustrated above. In this case, simply follow the instructions below:
Step 1
:
Unscrew the end
Step 2
:
Insert the tube through and push it
firmly into the pipe connector
Step 3
:
Screw the end back on
