BM2 BIEMMEDUE GEMINI PLUS, Instructions For Use And Maintenance Manual

Page: 46 / 52

Use a
MAINTENANCE
■ Eliminating dirt from the drain hose
If the suction tends to be reduced and the water
level in the dust collecting tank is correct (pag.
14), check the water drain hose as follows:
- Disconnect the machine from the power
supply.
- Remove the male plug of the flexible hose from
the machine.
- Remove the dust collecting tank from its
seat on the machine (fig. 33) and lift up the
protection cover.
- Remove the drain hose J pulling it upwards and
check it is not clogged. If the hose is clogged,
clean it.
- Refit hose J , close the cover and reposition the
tank on the machine.
■ Inactivity of the machine
Disconnect the machine from the mains before doing
the following operations.
Once you have finished using the machine, do the
following:
- drain the water off the dust collecting tank
and clean the tank.
- store the machine in a dry place which is
not subject to sudden temperature changes.
- clean the machine with a soft cloth and
some water; do not use any solvent or
detergent.
-
store the machine on a horizontal surface
(on the floor, if possible) to avoid it may fall
down.
- clean the accessories.
J