BM2 BIEMMEDUE GEMINI PLUS, Instructions For Use And Maintenance Manual

Page: 34 / 52

USE OF THE MACHINE
12
Use and Maintenance
■ Connection to the mains
Before connecting to the power mains check that:
- voltage and power ratings of the machine
printed on the relevant data plate, are
compatible with the electrical system;
- the electrical system to which the machine will
be plugged complies with the norms and has
a safety switch for fault current that does not
exceed a value of 30 mA;
- the electrical outlet to which the machine must
be plugged has a rating of 16 A and it is duly
earthed;
- the power cord has no damage or abrasions and is
in perfect condition.
■ Starting the machine
Once the plug of the power cord has been
connected to the mains, the machine can be
operated in seven different ways:
1
steam only
2 detergent only
3 steam and detergent release
4
steam suction
5 detergent suction
6
steam and detergent suction
7 suction only
Never pull the electrical cord to unplug the
socket.
If the power cord is damaged, it must be
replaced by qualified personnel of the Technical
Service Centre.
■
Starting with steam release
- Press buttons G (ON/OFF) on the machine top
(fig. 9).
- After a few minutes, the green light Y will come
on indicating that steam can be supplied.
- Push lever H (fig. 10) on the handle and start
cleaning; to interrupt the steam flow release the
lever .
- If you have to temporarily leave the machine
unattended, block the steam lever pressing
button on pistol grip
W
CAUTION
CAUTION
CAUTION
W
H
Fig. 10
I
REAR VIEW OF THE
Fig.