NPA100DA
USER MANUAL
Contact:
|
|
07
Dante® Controller software is required in order to setup and configure the NPA100DA as well as control your Dante®
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/software/dante-controller
Upon connecting the NPA100DA to a compatible network, the Dante® Controller software should automatically
discover the device. The NPA100DA will appear in the Dante® Controller with the name “NPA100DA”. On the “Routing”
screen it is possible to then create audio routing between Dante® transmitters and receivers within the same system.
Dante® Controller
Dante® Audio
The NPA100DA features both a Dante Audio input and a Dante Audio output. The current source that is selected will
always be the source that is output via Dante (eg: analogue line input, optical audio input, or HDMI ARC input).
Please note:
It is not possible to route the Dante® audio input into the NPA100DA to the Dante® audio output within
the same NPA100DA due to limitations within the Dante® Ultimo chipset utilised.
