NPA100DA
USER MANUAL
Contact:
|
|
03
Our NPA100DA networked audio zone amplifier delivers advanced audio
integration within a commercial or residential AV installation.
The NPA100DA features a 2 x 50W digital amplifier (1 x 100W mono) or 70V /
100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante
audio integration and 2ch balanced / unbalanced audio outputs.
The NPA100DA supports a variety of inputs including 2ch Dante audio, HDMI
ARC, MIC audio with 48V Phantom power support, optical audio and 2ch
balanced / unbalanced analogue audio.
The NPA100DA can be powered via PoE++ from a compatible network switch,
or locally should the switch not support PoE++. The unit also includes the
ability to lower the amplifier power output subject to PoE capabilities, support
for combined or independent LAN and Dante connections, DSP with a 10 band
EQ, audio delay for lip sync correction, independent gain control for audio
inputs and control via front panel, IR, RS-232, TCP/IP, web-GUI or 12V trigger.
Introduction
FEATURES:
• Advanced network audio amplifier with Dante Integration
• Supports 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm or 70 / 100V constant output for multiple speakers with longer
cable runs
• Supports power via PoE++ on Dante LAN connection or Local power supply*
• Dual network option - independent Dante and LAN control ports, or combined to a single LAN
• Audio inputs include:
- 2ch Dante / AES67 audio input
- HDMI ARC, with CEC volume control
- MIC audio input with phantom power and auto-ducking
- 2ch analogue audio input – unbalanced & balanced
- 1 x optical (S/PDIF) audio input
• Audio outputs include:
- 2ch Dante/AES67 audio output
- 2ch variable / fixed analogue output, unbalanced & balanced
- 1 x LFE subwoofer output
• Independent gain control for input channels
• DSP with 31 band EQ with +/-10dB and audio delay
• Local 12V input trigger for automated power control
• Control via front panel, IR, RS-232 and IP
• Auto standby mode with signal sensing
• In-built web-GUI for setup and control
* Amp power limited when using PoE+
