NPA100DA
USER MANUAL
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
12
Output Page:
The Output page allows users to change settings specific to the outputs of the NPA100DA.
The NPA100DA features 4 audio output options:
•
Master output - this controls the audio output for all outputs (independent to the individual outputs below)
•
Amp output - this controls the audio amplifier output volume
•
Line output - this controls the analogue line level output volume
•
Dante output - this controls the Dante audio output volume
It is also possible to invert either the left and/or right audio channel, mute each output, mix each output (stereo output,
left channel only, right channel only, left and right channels summed into mono) as well as adjust the audio delay from
0-50ms. The Amp output also has the ability to change the output impedance. It is important to configure this to either
4Ω or 8Ω to match the impedance of speakers being used or you could risk clipping the amplifier output.
A user can also adjust the 31 band GEQ (Graphic Equaliser) per each output channel (Amp, Line and Dante). There are 3
configuration options - Flat, Custom and Custom 2, where a user can save their own configuration into these slots.
