Blusafe Origin Smart, User Manual

Page: 101 / 126

P097
① Place a finger/thumb with a registered
fingerprint against the fingerprint scanner.
② Upon the scanner successfully reading the
fingerprint, you will hear
'
Door open
'
and
push down the handle to unlock.
8.1 UNLOCKING VIA THE FINGERPRINT SCANNER
• Before the lock is setup, i.e., a Homeowner account is paired with the lock, the Origin
Smart handle can be opened by any fingerprint.
• The fingerprints stored in the lock will remain stored even if the batteries are drained;
once new batteries are inserted or backup power is used, previously stored fingerprints
will still operate the lock.
Important!
Fix – Fingerprint Fails to Operate the Lock
I. If a fingerprint scan fails to operate the lock, please ensure both the fingerprint sensor and
finger that touches the sensor are clean, dry and free from grease, and then try again.
II. If cleaning the fingerprint sensor and the finger do not work, please try again using a
different fingerprint that is registered by the member to operate the lock. You may need to
delete and re-add the fingerprint of the finger that failed to operate the lock.
III. If no fingerprint is working, please use the App, key card or keypad to open the door.
IV. If no entry method is working, the batteries likely do not have power. Please try using a
backup power outlet with a 9V battery, and then your fingerprint, key card, keypad or App
to operate the lock.
Door open.