blupura WAVE I.T., Use & Maintenance Manual

Page: 23 / 36

23
Fig. 23.1
Connection to the mains
water supply
Check that the mains pressure
is between 1 bar and 3,5 bar. To
enhance the quality of the sparkling
water dispensed, an incoming
flow rate in excess of 3.5 l/min is
recommended.
Use a food grade pipe (external
diameter 5/16” = 8 mm) to connect
the water supply entry (1) to the mains
water supply, preferably with a wall
tap.
The watercooler comes with a non-
return valve (2) and a security valve (3).
It’s not included a water pressure
reducer, that must be assembled
before the WAVE.
Once the pipes are attached, turn on
the tap. Ensure there are no leaks.
Caution!
To connect the water cooler to the
mains water supply, you will need to
use a new set of connectors (joints,
gaskets and pipes).
Do not use a set of connectors that has
already been used elsewhere.
The water pressure entering the unit
must be between a minimum of 1,0
bar (0,10 MPa) and a maximum of 3,5
bar (0,35 MPa)
1
2
3