BLUM MINIPRESS top M70.2000, Safety Instructions, Set-Up Instructions And Instruction Leaflet, Page: 5 / 56

5
MINIPRESS top
Safety
Areas of responsibly
Risk levels
Safety information
Operation
Installation
The operator
■ must ensure that only fully-trained personnel, who have read and understood
the instruction leaflet, especially the chapter on safety, operate and service
the assembly machine.
■ is responsible for the safety-related condition of the assembly machine.
■ will take the assembly machine out of service immediately when faults
are discovered that affect safety.
■ CAUTION indicates a danger that could lead to injury if not avoided.
■ WARNING indicates a danger that could lead to serious injury if not avoided.
■ This NOTE symbol indicates information that should be observed.
CAUTION
NOTE
WARNING
Serious cuts.
Failure to heed this warning may result in personal
injury.
➢ Always disconnect the assembly machine from the
power supply and the pressurised air network before all
cleaning and maintenance work.
WARNING
■ The assembly machine is designed to only be operated by one person.
■ The assembly machine is only intended for stationary operation.
■ Ensure there is sufficient lighting.
■ Only attach the assembly machine to a sufficiently stable table. Load bearing
capacity: minimum 250 kg. Height 850 mm (+/- 50 mm).
■ The assembly machine may not be operated without the work table.
■ The assembly machine is not explosion-proof. It should not be
set up near painting facilities.
■ The assembly machine is not suitable for operation in an open environment.