BLUM MINIPRESS top M70.2000, Safety Instructions, Set-Up Instructions And Instruction Leaflet, Page: 32 / 56

8
7
32
MINIPRESS top
Drilling and insertion
➢ Check the work table for soiling and remove dirt as necessary.
➢ Push the work piece against the stop and ruler.
➢ Pull the hold down clamp [7] over the work piece [13].
➢ Check for any collisions.
➢ The hold down clamp [7] must be 3 mm over the work piece.
➢ Set the height of the hold down clamp [8].
■ We recommend using hold down clamps to ensure safe and precise
processing of the work piece.
NOTE
Hold down clamp