BLUM MINIPRESS top M70.2000, Safety Instructions, Set-Up Instructions And Instruction Leaflet, Page: 36 / 56

20
21
36
MINIPRESS top
Drilling and insertion
The following requirements must be met so that the drilling process can be initiated:
➢ No horizontal hold down clamp [11] may be clamped. Clamp in the drilling head [25].
➢ The emergency off button [21] must be released.
➢ The Y measurement depth must be under 100 mm.
Serious cuts.
Failure to heed this warning may result in personal
injury.
➢ Only one person at a time should operate the assembly
machine.
➢ All items except for the work piece should be removed
from the work area [A] of the assembly machine.
➢ Keep your hands and other objects away from the work
area [A] of the assembly machine.
➢ Caution crush danger in the area of the hold down clamp.
➢ Wear eye protection.
➢ Wear ear protection.
➢ Wear suitable work clothing.
WARNING
➢ Press the start button [20] until the drilling process is ended automatically.
■ The drilling process is stopped automatically when the pre-set drilling depth is
reached.
NOTE
Drilling